This listing is for the depicted gemstone. It can be purchased loose or can be reserved or bundled for a custom jewelry project

• 4.9 carats
• 12.5 mm in length, 11.11mm in width, and 8.5mm in depth 
• Cut in my own Quadrilateral Galaxy Design
• Uncut gem sourced from Nigeria
• Unheated/untreated
• Loupe Clean!! 
• Medium tone
• This gem is available as a loose purchase or with a jewelry commission 

This is one of the rarer tourmalines I've faceted in a while. It has both a dominant bluish green and secondary slightly yellowish Green hue visible with both color spectrums converging at the CenterPoint. The uncut gem had a bluish green hue visible on the AB axis and a yellowish green hue visible through the C axis (long axis of the tourmaline). As far as tone goes, I'd rate this one a smidge darker than a medium but not enough to be medium dark. Its internally flawless, which is as good as it gets! The color, clarity and cut make this an outstanding collectors gem too. 

This listing is for the depicted gemstone. It can be purchased loose or can be reserved or bundled for a custom jewelry project

• 3.3 carats
• 10.4mm in length, 8.5mm in width, and 6.9mm in depth
• Faceted in my own Galaxy Octagon design
• Uncut gem sourced from the state of Oregon (USA)
• Unheated/Untreated
• Copper inclusions visible
• This gem is available as a loose purchase or with a jewelry commission 

This is a decent sized salmon colored Oregon Sunstone. This is a particularly clean piece, with only a few larger copper platelets visible.  This gem is simply vibrant! It is open tone and it will glow and sparkle in any lighting.  I'd recommend at least an 18kt yellow or rose gold for a setting. A 22kt yellow gold would be ideal. White gold alloys are very tough, its possible a white gold setting might damage this gem. A 95% platinum iridium alloy would be suitable as well. 

Cette liste est pour la bague en or représentée faite sur commande dans votre taille avec une finition de surface mate et une gravure brillante

• L'anneau a une largeur de 4 mm et une épaisseur de 1 mm

- Son profil bas avec des bords intérieurs lisses et relativement léger. Je peux faire ce même design en bandes plus épaisses ou plus larges et plus épaisses sur demande.

** Pour référence, 4 mm est l'équivalent d'environ trois centimes de 10 centimes empilés ensemble

• J'ai découpé le motif à la main avec un graveur à angle large et étroit. Ce motif est la variation 1, chaque anneau est légèrement unique car je grave le motif à la main mais je suis ce motif aussi étroitement que possible.

• Je fabrique cet article sur commande

• Le dimensionnement des bagues est gratuit pour la plupart des bagues

• Je fabrique personnellement tous mes bijoux à la main dans mon atelier à Great Barrington, Massachusetts

• Cette bague peut être gravée d'un message personnalisé et/ou d'une date. La gravure est gratuite, laissez-moi simplement une note à la caisse avec votre texte demandé et / ou les dates ou n'hésitez pas à me contacter directement.
- La police étroite et la police large s'adapteront à cette bague

This listing is for the depicted loose gemstone that my student faceted!

• 2.42 carats
• 8.8mm in length, 7.4mm in width, and 5.8mm in depth
• Faceted in Indys Precision shield design
• Untreated!
• Eye clean! 

Detailed Gem Description:

A natural and heat-treated zoisite var. Tanzanite with a dominant violet hue, a medium tone, and moderately strong to strong saturation.  This is an open-tone gem, it will glow and sparkle in any lighting!

See the last graphic for reference on how I graded these. To maintain originality, I made the reference graphics with gems of my own design but it is based on GIA's color description system.

Photos were taken in daylight and under a microscope.  The first four videos were taken in daylight with the sun overhead and a blue sky. The last few scenes in the fourth video are inside in passive lighting and under my overhead LED lights. The outdoor scenes in the fifth video were taken on an overcast day.   Please review all the videos thoroughly.

Gemstone Rough Country of Origin: Tanzania
Cutter: Indigo

• Microscopy Report:
This gem has one healed secondary fluid inclusion, It can be seen on the flat edge opposing the point.  It looks like a milky white streak. The reference photos were taken in 4x magnification under direct and darkfield illumination. 

• If you would like this gem for a custom jewelry project, you can reserve it directly from this listing, follow up with the details for your custom project, or purchase it bundled with a pre-priced setting.

• A GIA lab report can be ordered for your purchase, see the "GIA laboratory report listing" for details


• For pricing on a setting view my "customizable settings" section or reach out to me with your request

Diamond Rose Gold Hand Made Vintage Engagement Ring - Marquise Ring - Leaf Engagement Ring - Diamond Ring - Diamond Bezel Ring

This listing is for both rings, the diamond ring and the fitted wraparound band

• The center setting on the depicted ring is 9x5.5 mm in diameter. I will pick a VS clarity diamond that is closest to the listed dimensions and weight depending on what is currently available from the cutter. I pick to please!

• You will get a conflict-free VS2- VS1 Clarity diamond that is in-between 0.48-0.55 carats in weight. Exact specs will depend on what is currently available from the diamond cutter. The diamond will come with a GIA (Gemological Institute of America) grading report. A GIA serial laser inscription is available upon request, however, it won't be visible once set in the bezel. A laser inscription may add another week or two to the production time of this ring.

- I will contact you with some choices based on what is currently available

- The ring also features 2x 0.04 ct VS brilliant-cut round accent diamonds.

*Please note* I do not deal in laser-drilled, irradiated or fracture-filled diamonds. All are mined & processed in compliance with
United Nations resolutions prohibiting trade in conflict stones.

*This ring is not sizeable! If you are located within the US I will send you a free set of steel ring gauges to verify your ring size upon placing your order. They are free and you do not have to return them and they will not extend your production time. International buyers, please contact me for details on sizing prior to placing your order. Sizing it means remaking it completely and there is a $200 sizing fee for this ring.

• Made in Choice of 14 kt yellow, rose, white or 18kt white gold

• I custom make this item to order

• Ring sizing is free for most rings

• I personally hand make all of my jewelry in my workshop in Great Barrington, Massachusetts

• This ring can be engraved with a personalized message or date.  Engraving is free, simply leave me a note at checkout with your requested text and or dates or feel free to reach out to me directly.
- Only the narrow font will fit on this ring